(For more info, see: Acrodisc wwPTFE Syringe Filters Versus Syringe Filters with Hydrophilic Polypropylene (GHP) Membranes White Paper: April 2021 720007171EN) Aijiren Technology offers scientists and lab managers GXF/wwPTFE Acrodisc PSF 0.45µm 25mm 50/Pk, 186009329.
Designed for sterile and nonsterile small-volume filtration (1-200 mL) Produced with high-quality Millipore ® membranes Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume reduces sample loss Low extractable and low binding membrane options Whatman ® syringe filters
Housing Material: Polypropylene Effective Filtration Area (cm2): 4.08 Pore Size (µm): 0.45 µm Holdup Volume (µl): <100 Sample Volume (mL): <100 Inlet Connection: Female luer lock Outlet Connection: Male luer slip Maximum Operating Compare this item Syringe Filters and 50mm Units, Non-Sterile - MCE, CA, NY, PTFE, PVDF Advantec MFS
GH Polypro (GHP) Membrane Disc Filters Membrane with Chemical Compatibility for Aqueous Solutions and Aggressive Solvents Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified.
Hydrophilic PTFE Membrane Syringe Filters mdi Membrane Technologies pre-wetting required Unique 16-channel design for very low hand pressure and maximum throughput Low hold-up volume The PTFE membrane and polypropylene (PP) construction makes it suitable even for filtration of highly aggressive solvents.
Jun 27, 2018 · -Choice of media -Polypropylene housing -Luer-lock inlet Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections Typical hold-up volume: < - 100L. Note: PVDF membrane is not for use with acetone, DMF, DMSO, or bases > - 6N. All membranes are HPLC certified for low levels of UV-absorbing extractables.
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Filter Plates, Syringe Filters, Centrifugal Devices and Membrane Filter Discs. Essential for biomolecule purifications and separations filter plates are offered in different filtration media membrane to accommodate any array applications. With individual membranes
lulose membrane specially designed for “sticky” samples. This membrane has ultimate recovery at low adsorption (95 to 98%) and very small hold up volume ( 20 µL). Ideal for desalting and concentration of Ig fractions.
Jul 1, 2017 · Polypropylene (PP) is one of the most important polymers for microporous membrane due to its high void volume, well-controlled porosity, high thermal and chemical stability, and low cost. However, the hydrophobicity of PP becomes a limitation to broaden its applications. Furthermore, membrane fouling occurs more seriously on hydrophobic
Aug 16, 2017 · -Choice of media -Polypropylene housing -Luer-lock inlet Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections Typical hold-up volume: < - 100L. Note: PVDF membrane is not for use with acetone, DMF, DMSO, or bases > - 6N. All membranes are HPLC certified for low levels of UV-absorbing extractables.
Filter volumes as low as 50µL up to 750µL with low hold-up volume Use with any laboratory microcentrifuge Virgin polypropylene filter housing with tapered 2mL, capped receiver tube 10,000xG maximum centrifugal force Related Products: Filtered Microcentrifuge Tubes Compare this item Polypropylene Buchner Funnels Aijiren Tech Nalgene
Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Laboratory. Suitable for filter sterilizing dilute biological fluids. Low hold-up volume. Less sample loss. Modified acrylic housing. Low hold-up volume minimizes sample loss. Filters 28142-340, 28144-040, and 28144-007 are sterilized by gamma irradiation and individually packaged.
of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive, Related Products: Luer Lock Filter
Upper Housing, Lower Reservoir: Polypropylene Membrane: GH Polypro (hydrophilic polypropylene) Pore Size 0.45 µm Effective Filtration Area 0.28 cm2 Dimensions Overall Length (fully assembled with cap): 4.5 cm (1.8 in.) Capacities Sample Volume: 50 - 500 µL Filtrate Receiver Volume: 500 µL Hold-up Volume (membrane/support): 2 µL
faster and easier to set up than conventional 47 mm discs. Millipak lOw-vOluMe capSule FilTerS Millipak filters with hydrophilic Durapore membranes are uniquely designed for the removal of particles and microorganisms. The stacked disc design allows minimal hold-up volume and no particle shedding, making Millipak units ideally suited for high